PRECISION PRODUCTS
7400 SAN FERNANDO RD. SUN VALLEY, CALIFORNIA 91352
Copyright J.F.K. Co. Precision Products 2008 - 2009
For 5-C Collets with Internal Threads
| MASTER STOP |
#MS 5C |
$12.00 |
LONG TUBE
6-3/4" long - 1.091 to 1.093 dia.
SHORT TUBE
3-3/4" - Same dia.
| #LT 5C |
$18.00 |
#ST 5C |
$16.00 |
FOR CHUCKING PARTS TO DEPTH, FROM THE FACE OF COLLET
MS 5C |
3 INCHES |
MS 5C and ST 5C |
7 INCHES |
MS 5C and LT 5C |
9-1/2 INCHES |
MS 5C ST and LT 5C |
13-1/2 INCHES |
MS 5C STOP NUT |
$8.00 |
JAM NUT |
$1.50 |
THREADED ROD |
$3.00 |
ADJUSTABLE KNURLING HOLDER
- 1/2" SHANK TO FIT QUICK CHANGE HOLDERS
- SQUARE HOLDER TO FACE OF THE LATHE
- FEED CROSS SLIDE TO CENTER OF STOCK - ADJUST PRESSURE OF KNURLS TO DIAMETER OF STOCK
- CAPACITY 1/4" to 1-1/2" DIAMETER
- KNURLS 1/4" - 1/4" WIDE - 3/4" DIAMETER
Excellent knurling is provided with this new type knurling holder. The self-centering tool is adjustable providing the ideal near-vertical-axis approach angle for a wide range of stock diameters. There is a minimized pressure on the spindle and cross-slide; knurling of thin wall tubing is therefore easily performed. Precision ground, high-speed medium diamond knurls are supplied.
KNURLING HOLDER
COMPLETE SET - 3 PIECES $45.00
| ADJUSTABLE KNURLING HOLDER |
$95.00 |
